Panasonic CQ-RG133W Cassette Player User Manual


 
E
N
G
L
I
S
H
CQ-RG133W
13
CQ-RG133W
12
E
N
G
L
I
S
H
9
DISC No.
Disc is dirty, or is upside down.
Select the next available compact disc. Check the disc.
DISC No.
Disc has scratches.
Select the next available compact disc. Check the disc.
No operation by some cause.
Eject the magazine. If failure persists, press the reset switch on the CD
changer. If normal operation is not restored yet, call the store where you
purchased the unit or the nearest Panasonic Service center to ask for repairs.
No disc in the changer (magazine)
Insert discs into the changer (magazine).
Error Display Messages
Scan Play
Tracks
Press [3] (SCAN). The track number blinks and
the first 10 seconds of each track on the discs
play in sequence.
To stop scanning and continue with the current
track, press
[3] (SCAN) again.
Scan Play
Discs
Press and hold [3] (SCAN) for more than 2
seconds. The first track of all the discs in the
magazine is played for 10 seconds each. Also,
Disc Number blinks at the same time. To stop the
current play of the disc scanning, press and hold
[3] (SCAN) for more than 2 seconds again.
Repeat Play
Press [4] (REPEAT) to repeat the current
selection. REP indicator lights.
The current selection continues to repeat until
you press
[4] (REPEAT) again.
Random
Play
Press [5] (RANDOM) to random selection of
music is played from all available CDs. R
5
indicator lights.
To turn it off, press
[5] (RANDOM) again.
lights
lights
blinks
blinks
Note:
CD changer functions are applicable to units with optional CD changer unit.
(sold separately)
C
D
-
C
CQ-RG133W
DIS
P
TRACK
TUNE
LOUD
MONO
MUTE
DISC SCAN REPEAT RAN DOM
1
2
3
46
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
5
C
D
-
C
D
IS
P
TRACK
TUNE
1
2
CD Changer Control
CD Changer mode
While a disc magazine is inserted in the CD changer, press [CD·C].
Play starts from the first track.
Disc Selection
[1] (
ii
DISC): Previous disc.
[2] (
jj
DISC): Next disc.
Note: The cassette, if loaded, should be
removed. Otherwise, the CD play will not start.
Time
Disc Number
Track Number
Track Selection
Press [TRACK 7] once to go to the next track, Press
repeatedly to step forward through all the tracks.
Press
[TRACK 6] once to play from the beginning of the
current track, Press twice to play the previous track. Press
repeatedly to step backward through all the tracks.
Track Search
Press and hold [TRACK 7] or [TRACK 6] for more than
0.5 second to activate fast forward or reverse through a
track. Release
[TRACK 7] or [TRACK 6] to resume the
normal CD play from that position.
q
w
e
Display Change
Press [DISP] (display) to switch to the clock display.
CD Changer display
Clock display
E
N
G
L
I
S
H
8
CD changer
indicator