E
N
G
L
I
S
H
CQ-RG133W
11
CQ-RG133W
10
E
N
G
L
I
S
H
7
To stop rewind or fast forward, gently press the button that is not in use.
The tape will resume playing from that position.
Top Side Playing Bottom Side Playing
Play Side Change
Press [a] and [f] at the same time to switch to the program on the other side of the tape.
The display changes to indicate which program is playing.
w
Rewind and Fast Forward
When the program indicator i lights, press [a] to rewind or press [f]
to fast forward the tape.
When the program indicator
o lights, press [a] to fast forward or press
[f] to rewind the tape.
blinks
Note: To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the unit.
Pencil
Exposed end
(Open end)
RG133W
T
T
LOUD
MONO
MUTE
DISC SCAN REPEAT RAN DOM
1
2
3
46
V
O
L
/
P
U
S
H
S
E
L
5
C
D
-C
CQ-RG133W
DISP
TRACK
TUNE
LOUD
MONO
MUTE
DISC SCAN REPEAT RANDOM
1
2
3
46
APM
BAND
PWR
V
O
L
/
P
U
S
H
S
E
L
5
DISP
Cassette Tape Player
Tape Insert (Loading a Cassette)
Gently insert a cassette with the exposed tape side facing
to the right until the mechanism captures it, and playback
starts.
q
Stop and Eject
Once inserted into the unit, your tape will play continuously until you eject it.
If you press
[u] (EJECT), the unit ejects the tape and returns to radio operation.
When you stop the car engine, the tape will stop but not be ejected.
Notes:
• You can not change to CD Changer mode or Radio mode while tape playing.
If you want to change to CD Changer mode or Radio mode, eject the tape.
• Always remove the cassette when you stop using the cassette player. This will
prolong the life of your tape.
Exposed Tape side
Program Indicator
(This indication “” rotates.)
Display Change
Press [DISP] (display) to switch to the clock display.
Tape display
Clock display
E
N
G
L
I
S
H
6
e