Filter
Top Products
Set-up Menus
TIME CODE menu
Item
No.
Superimposed
d
display
y
500
VITC POS-1
501
VITC POS-2
502
VITC BLANK
503 TCG REGEN
504 BINARY GP
505
TCG CF FLAG
506
DF MODE
507
TC MODE
508
TC PRESET
509
UB PRESET
No.
0000
0001
0006
0010
0000
0001
0008
0010
0000
0001
0000
0001
0002
0000
0001
0002
0003
0004
0005
0006
0007
0000
0001
0000
0001
0000
0001
0002
0003
Setting
Superimposed
d
display
y
Description of settings
10L
This sets the position where the VITC signal is to be
11L
inserted.
:
(The same line as that selected for VITC POS-2 cannot
16L be selected.)
:
20L
10L This sets the position where the VITC signal is to be
11L
inserted.
:
(The same line as that selected for VITC POS-1 cannot
18L
be selected.)
:
20L
BLANK
This sets whether the VITC signal is to be output.
THRU
0: VITC signal is not output.
1: VITC signal is output.
TC UB This selects the signal to be regenerated when the
TC
TCG is in the REGEN mode. (item No. 507)
UB
0: Both the time code and user
’
s bit are regenerated.
1: Only the time code is regenerated.
2: Only the user's bit is regenerated.
’
s bit is regenerated.
000
This sets the status for using the user's bit of the time
’
s bit of the time
001
code generated by the TCG.
010
0: NOT SPECIFIED (character set is not used)
011
1: ISO CHARACTER (8bit character set complying
100
with ISO646 and ISO2022 is used)
101
2: UNASSIGNED-1 (not defined)
110
3: UNASSIGNED-2 (not defined)
111
4: UNASSIGNED-3 (not defined)
5: PAGE/LINE (SMPTE262M page/line multiplexing
system)
6: UNASSIGNED-4 (not defined)
7: UNASSIGNED-5 (not defined)
OFF
This selects whether the CF flag of the TCG is to be set
ON ON.
0: CF flag is set OFF.
1: CF flag is set ON.
DF
This selects the drop frame or non-drop frame mode for
NDF
CTL and TCG.
0: CTL and TCG are used in the drop frame mode.
1: CTL and TCG are used in the non-drop frame mode.
P-REC
This sets the TCG mode.
P-FREE
0: Internal TC PRESET is used in the REC RUN mode.
I-REGEN
1: Internal TC PRESET is used in the FREE RUN
E-VITC mode.
2: Internal TC is used in the REGEN mode.
3: VITC of input video signals is used in the REGEN
mode.
This sets the time code generator value.
This sets the user
s bit value.
The underlined number and item are the factory settings.
28
:
:
:
: