Filter
Top Products
Set-up Menus
MEMORY MODE menu
Item
Setting
No.
Superimposed
No.
display
y
Superimposed
d
display
y
Description of settings
300 MEMORY
MODE
0000
0001
0002
0003
OFF
This sets the memory operation.
MEM STOP
0: No memory operation.
REPEAT 1
1: The tape stops near the BEGIN point when it is fast
CONTINUE forwarded or rewound.
2: When the tape reaches the end, it is rewound to the
BEGIN point where it stops.
3: When the tape reaches the end, it is rewound to the
BEGIN point where it is played, and this process is
repeated.
301 BGN/END PRESET
This sets the BEGIN point and END point.
The underlined number and item are the factory settings.
TAPE PROTECT menu
Item
No.
Superimposed
No.
display
y
400
STILL TIMER 0000
0001
0002
0003
0004
0005
401
SRC PROTECT
0000
STEP
0001
HALF
402
DRUM STDBY 000
OFF
0001
ON
Setting
Superimposed
d
display
y
0.5S
5S
10S
30S
1MIN
2MIN
Description of settings
This selects the time taken until the unit is set to the
tape protection mode when it has been left standing in
the stop, play pause or still mode.
(Units: S = seconds, MIN = minutes)
The setting for the time taken until the unit is set to
the tape protection mode when it has been left
standing in the REC PAUSE mode is fixed at 2
minutes.
This sets the tape protection operation which is
performed when the unit has been left standing in the
pause mode.
in the REC pause mode)
1: Half loading (standby OFF)
This sets whether or not the drum is to be stopped in
the STANDBY OFF mode.
0: The drum rotates at all times.
1: The drum is stopped in the STANDBY OFF mode.
403
STOP
0000
PROTECT
0001
STEP This sets the tape protection operation to be performed
HALF
when the unit is left standing in the STOP mode.
0: Step
1: Half loading
The underlined number and item are the factory settings.
<Note>
When using a consumer DV cassette tape, tape protection mode is set after 10 seconds, even if
STILL TIMER is set to "30S", "1MIN" or "2MIN".
0: Step (step FWD in the still or pause mode; step REV
1MIN
”
or
“
2MIN
”
.
27