Filter
Top Products
Set-up Menus
OPERATION menu
Item
Setting
No.
Superimposed
No.
Superimposed
Description of settings
display display
108 FORMAT SEL 0000
DVCPRO
This selects the format when an L cassette is used.
0001
DV 0: DVCPRO mode
0002
DVCAM
1: DV mode
2: DVCAM mode
<Note>
The cassette tape is played back in one of the modes listed below depending on the tape type and
settings used.
Type
FORMAT SEL setting
DVCPRO
DV DVCAM
S size cassette DV DV DVCAM
M size cassette DVCPRO DVCPRO DVCPRO
L size cassette DVCPRO DV DVCAM
Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM
tapes are to be used in the playback mode, it is recommended that playback be limited to as short a
period of time as possible.
109 REC INHIBIT
0000 OFF
This selects whether to inhibit recording on the VTR.
0001
ON
0: Recording is not inhibited.
1: Recording is inhibited.
The underlined number and item are the factory settings.
INTERFACE menu
Item
No.
Superimposed
No.
display
200
BAUD RATE 0000
0001
0002
0003
0004
201
DATA LENGTH 0000
0001
202
STOP BIT 0000
0001
203
PARITY 0000
0001
0002
204 ACK RETURN 0000
0001
Setting
Superimposed
Description of settings
display
1200
This sets the RS-232C transfer rate (baud rate).
2400
4800
9600
19200
8BIT
This sets the RS-232C data length.
7BIT
1BIT
This sets the RS-232C stop bit length.
2BIT
NONE
This sets whether the RS-232C parity bit is to be used
ODD
and, if so, whether with even or odd parity.
EVEN
0: The parity bit is not used.
1: The parity bit is used with odd parity.
2: The parity bit is used with even parity.
OFF
This sets the RS-232C return data.
ON
0: The ACK code is not returned.
1: The ACK code is returned.
The underlined number and item are the factory settings.
<Note>
After the settings of items No.200 through No.203 have been changed, the new settings will not
take effect until the power is switched on. This means that the power must be turned off and
back on again after these settings are changed.
26