Filter
Top Products
Liveradio – User guide
page
7 / 32
Enter your wireless security code
There are three types of security for a wireless network:
x Non-secure: no padlock
x Secure WEP: padlock
x Secure WPA: padlock
Note: The security type of your wireless network will be detected automatically by your Liveradio.
You should enter the code (WEP or WPA) corresponding to your wireless network. This is a string of
characters indicated on your wireless network, accessible from your PC or via the information system
administration manager.
If you are using a Livebox, this is a string of 26 characters (letters and numbers). This
code is written on the label under your Livebox.
How to enter the security code:
Enter the WEP / WPA code by turning the volume control (4) to scroll through the characters on the
screen:
x To confirm a character, press
x To correct an incorrect character, press , then re-enter using the volume control (4)
Once the characters have been entered, press
to go to the next step
Non-secure wireless network:
No data entry is required. The Liveradio will automatically jump to the next step.
WEP-secure wireless network:
When you select a WPA-secure wireless network, this screen is
displayed. Enter the WPA key for your Livebox or other router.
When you have entered the characters, press Ź to confirm.
WPA-secure wireless network:
When you select a WPA-secure WiFi access point, this screen is
displayed. Enter the WPA key of your access point.