Filter
Top Products
19
Initial Setup
6. Press ▲ or ▼ to enter the distance between the surround speakers
and your listening area. Each time you press the button, distance
changes for 1 foot (between 1 to 30 feet).
Dynamic Range Control Setting
In Dolby Digital mode, the dynamic range (how loud and soft sounds are
produced) is compressed so you can better hear low-level sound. This
setting determines the level of compression. Use the MAX setting for low
volume levels, OFF for high volume levels and MID for medium volume
levels.
1. Press until DRC OFF appears on the display.
2. Press ▲ or ▼ to select OFF, MAX, or MID.
Digital Input Setting
Use this setting to assign the rear panel digital input jacks to the
desired components. (See “Digital Connections” on Page 12.)
1. Press until COAX DVD appears on the display.
2. Press ▲ or ▼ to select the device you connected to rear panel coax
digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR,
or OFF (no connection).
3. Press until OPT1 CD appears on the display.
4. Press ▲ or ▼ to select the device you connected to rear panel
OPT1
digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR,
or OFF (no connection).
5. Press until OPT2 CD appears on the display.
6. Press ▲ or ▼ to select the device you connected to rear panel
OPT2
digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR,
or OFF (no connection).
Note:
When the
S✱
speaker setting is
selected, you cannot set the surround
speaker’s distance.
Note:
We suggest you set the speaker
level’s when all setup is complete. (See
“Adjustment Using Test Tone” on
Page 27.)
31-3046.fm Page 19 Monday, January 29, 2001 12:43 PM