Filter
Top Products
12
Preparing Your Receiver
Digital Connections
You can connect up to three digital output devices to your receiver. Two
inputs use the fiber-optic cable, and one uses coaxial digital audio
cable.
Using the appropriate cable, make connections between the digital out-
put jack of your device and the digital input jack on the receiver.
The digital input jacks are assigned to the following function at the fac-
tory. For example, when you select the CD function, the
OPT 1
jack input
activates.
OPT 1
: CD player
OPT 2
: MD recorder
COAX
: DVD player
You can change this arrangement to suit your needs. See “Initial Setup”
on Page 17.
Notes:
• You must remove the DIGITAL IN OPT
1 or 2 jack’s rubber cover in order to
connect to either jack.
• Keep the cover in place when you are
not using either jack.
DVD
MD
CD
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
OPTICAL
DIGITAL
IN
OPT
1
OPT
2
COAX
PCM/
PCM/
CD Player
DVD
MD Recorder
Note:
If you are connecting a LD or DVD
player with AC-3 RF, you need a sepa-
rate RF demodulator (not supplied). For
details, see the manual provided with the
RF demodulator.
31-3046.fm Page 12 Monday, January 29, 2001 12:43 PM