Filter
Top Products
16
Preparing Your Receiver
Using the AC Power Outlet
Your receiver has an AC power outlet that you can use to power an elec-
tronic device, such as a cassette deck or VCR. This switched outlet
turns on and off with the receiver and provides a maximum of 100
watts.
Connecting to AC Power
Before you plug in the receiver’s power cord, double check all other con-
nections.
To power the receiver, plug the supplied power cord into a standard AC
outlet. The power cord’s plug is polarized and fits only one way.
Caution:
Do not connect appliances with
high power consumption, such as a
heater, iron, monitor, or TV, to this AC
outlet. Doing so can cause a risk of over-
heating and fire, and could damage the
receiver.
CAUTION:
SEE INSTRUCTION
MANUAL
8~16 / SPEAKER
6~LESS THAN 8 /SPEAKER
IMPEDANCE SELECTOR
AC OUTLET
SWITCHED
100W MAX
0.8A MAX
DO NOT CONNECT
TV SET OR MONITOR.
AC 120V 60Hz
CAUTION:
CENTER
PREOUT
SUB
WOOFER
PREOUT
LR
LR
SURROUND
SPEAKERS
CENTER
SPEAKER
FRONT SPEAKERS
L
R
L
R
A
B
A
B
CAUTION:
SPEAKER IMPEDANCE
6 OR 8 ~16 / SPEAKER
Warning:
To prevent electric shock, do
not use this polarized plug with an exten-
sion cord, receptacle, or other outlet un-
less you can fully insert the blades to
prevent blade exposure.
CAUTION:
SEE INSTRUCTION
MANUAL
8~16 / SPEAKER
6~LESS THAN 8 /SPEAKER
IMPEDANCE SELECTOR
AC OUTLET
SWITCHED
100W MAX
0.8A MAX
DO NOT CONNECT
TV SET OR MONITOR.
AC 120V 60Hz
CAUTION:
CENTER
PREOUT
SUB
WOOFER
PREOUT
LR
LR
SURROUND
SPEAKERS
CENTER
SPEAKER
FRONT SPEAKERS
L
R
L
R
A
B
A
B
CAUTION:
SPEAKER IMPEDANCE
6 OR 8 ~16 / SPEAKER
31-3046.fm Page 16 Monday, January 29, 2001 12:43 PM