Filter
Top Products
9
Cautions:
• The recommended AC adapter supplies 3 volts and
delivers at least 300 milliamps. Its center tip is set to
negative, and its plug correctly fits the
DC 3V
jack on
the bottom of the SCP-84. Using an adapter that
does not meet these specifications could damage the
SCP-84 or the adapter.
• Always plug the AC adapter’s barrel plug into the
SCP-84 before you plug its power module into the
AC outlet, and unplug its power module from the AC
outlet before you unplug its barrel plug from the SCP-
84.
Follow these steps to connect an AC adapter to the SCP-
84.
1. Set the adapter’s voltage switch to 3V.
2. Insert the 3.4 mm outer diameter/1.3 mm inner diam-
eter barrel plug into the AC adapter’s socket. Line up
TIP on the plug with –NEG on the socket.
(illus)
14-1225.fm Page 9 Friday, July 2, 1999 9:00 AM