Optimus LAB-1100 Turntable User Manual


 
7
OPERATION
Note:
Make sure you have set
LINE OUT
ON/PHONO OUT OFF
for the type of
sound system you have before operat-
ing the turntable.
1. Open the dust cover.
2. Remove the stylus cover.
3. If you are playing a 33
1
/
3
RPM
record, place it directly over the
spindle.
If you are playing a 45 RPM record,
place the supplied 45 RPM adapter
over the turntable spindle, then
place the record over the adapter.
4. Set the
6"/12"
selector according to
the record’s diameter. Then close
the dust cover.
5. Press
SPEED
in or out to set the
turntable’s speed (33
1
/
3
or 45 RPM).
6. Press
PLAY
. The turntable starts to
rotate and the tone arm moves to
the beginning of the record, lowers
to the record, then starts to play.
7. At the end of the record, the tone
arm automatically returns to the
tone arm rest and the turntable
stops. To stop playing the record
sooner, press
STOP
.
Notes:
If the tone arm does not automati-
cally return when it reaches the
end of the record, press
STOP
to
reset the mechanism.
To protect the stylus from dam-
age, we recommend you replace
the stylus cover when you are not
using the turntable.
illustration
illustration
illustration
illustration
illustration
illustration
42-2023.fm Page 7 Wednesday, August 11, 1999 2:50 PM