Filter
Top Products
12
RECORD CARE
• Always hold your records by the
edges. Touching the grooved sur-
face can leave fingerprints that can
collect dust and dirt.
• Always return your records to their
jackets immediately after use. This
helps protect them from dust and
scratches.
• Store your records in a vertical posi-
tion and protect them from extreme
temperatures, moisture, and direct
sunlight.
CLEANING/REPLACING
THE STYLUS
A dirty or worn stylus causes rough, dis-
torted sound and could damage your
records.
Caution:
Do not touch the stylus while
cleaning or installing it.
If the stylus gets dirty or dusty, use a
soft brush to gently clean it.
If the stylus is worn, follow these steps
to replace it. You can order a replace-
ment stylus assembly AT3600LAX (RSU
No. 12039012) through your local Ra-
dioShack store.
1. Turn your receiver/amplifier off.
2. Remove the stylus assembly from
the cartridge by gently grasping its
sides and pulling it down.
3. Insert a new stylus assembly and
gently snap it into place.
illustration
DON’T SHOW STY-
LUS REMOVAL; CAN
BE CLEANED IN
PLACE
illustration
42-2023.fm Page 12 Wednesday, August 11, 1999 2:50 PM