Onkyo TX-SR701 Stereo Receiver User Manual


 
63
Using remote controller
* Diagram for RC-533M
RCVR MODE
TUN
CH
VOL
MUTING
RCVR MODE
VOL
MUTING
TAPE
operation
buttons
Overview
The RC-533M/515M remote controller is a useful tool that can not
only operate the TX-SR701/701E/601/601E, but also all the other
components of your home theater as well. To operate any
component, first press the Mode button on the remote controller that
corresponds to the component that you wish to control. Then simply
press the desired operation button and the component will operate
accordingly. For example, if you wish to select the CD input source
at the TX-SR701/701E/601/601E with the remote controller, first
press the RCVR MODE button to select the TX-SR701/701E/601/
601E and then press the CD (INPUT SELECTOR) button.
1. Press the RCVR MODE button.
The RCVR MODE button lights.
2. Press the TUN input selector button.
3. Press the desired operation button.
Operation buttons:
CH : Selects the desired preset station number
You may also use the following buttons:
VOL : Adjusts volume at TX-SR701/701E/601/601E
MUTING: Activates muting function at TX-SR701/701E/601/601E
The connector of the Onkyo cassette tape deck must be
connected to the TX-SR701/701E/601/601E (see page 24).
1. Press the RCVR MODE button.
The RCVR MODE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo cassette tape deck.
Operation buttons:
: Play
: Stop
: Rewind
: Fast forward
: Skips to beginning of next track during playback
: Skips to beginning of current track during playback
REC : Record/Pause
: Reverse playback
You may also use the following buttons:
VOL : Adjusts volume at TX-SR701/701E/601/601E
MUTING: Activates muting function at TX-SR701/701E/601/
601E
Note:
Even for devices with the and buttons, signal discrepancies
may cause them not to work properly.
Calling up a preset radio station
Controlling an Onkyo cassette tape deck