Filter
Top Products
8
Front & Rear Panels—Continued
H Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the
TUNING [ ] [ ] buttons are used to tune the
tuner, and the PRESET [ ] [ ] buttons are used
to select radio presets (see page 53). When the
onscreen setup menus are used, they work as arrow
buttons and are used to select and set items. The
[ENTER] button is also used with the onscreen
setup menus.
I SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
J MASTER VOLUME control (49)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 99, or MAX.
K VIDEO 4 INPUT
This input can be used to connect a camcorder,
game console, and so on. There are jacks for optical
digital audio, S-Video, composite video, and analog
audio.
L SETUP MIC (38)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
M TUNING MODE button (52)
This button is used to select the Auto or Manual tun-
ing mode.
N MEMORY button (53)
This button is used when storing or deleting radio
presets.
O DIMMER or RT/PTY/TP button (51, 55)
DIMMER is used to adjust the display brightness.
On the European model, this is the RT/PTY/TP but-
ton, and it’s for RDS (Radio Data System). See
“Using RDS (European models only)” on page 54.
P DIGITAL INPUT button (44, 77)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
Q DISPLAY button (50)
This button is used to display various information
about the currently selected input source.
R LISTENING MODE [ ] [ ] buttons (61)
These buttons are used to select the listening modes.
S STEREO button (61)
This button is used to select the Stereo listening
mode.
T TONE, [–] & [+] buttons (50)
These buttons are used to adjust the bass and treble.
U ZONE 2 LEVEL button (82)
This button is used to set the volume for Zone 2.
V ZONE 2/OFF button (81)
The ZONE 2 button is used to select the input
source for Zone 2.
The OFF button is used to turn off the output of
Zone 2.
W PHONES jack (51)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
X PURE AUDIO button and indicator (61)
The North American models do not have this button
and indicator.
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected.