Filter
Top Products
56
En
Controlling Other Components
You can use the AV receiver’s remote controller
(RC-764M) to control your other AV components, includ-
ing those made by other manufacturers. This section
explains how to enter the remote control code (with the
default underlined) for a component that you want to con-
trol: DVD, TV, CD, etc.
The following REMOTE MODE are preprogrammed
with remote control codes for controlling the components
listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the pages
indicated.
You can look up for appropriate remote control code from
on-screen setup menu.
Note
• This setting can be carried out by using On-screen Setup Menu
only.
Main menu Remote Controller Setup
Preprogrammed Remote Control
Codes
BD/DVD
Onkyo Blu-ray Disc player (➔ 58)
TV/CD
Onkyo CD player (➔ 58)
PORT
Onkyo Universal Port Option (➔ 54)
Looking up for Remote Control Code
1
Press RECEIVER followed by SETUP.
The main menu appears onscreen.
2
Use / to select “Remote Controller Setup”, and
then press ENTER.
The “Remote Controller Setup” menu appears.
3
Press ENTER.
4
Use / to select remote mode, and then press
ENTER.
The category selection menu appears.
1. Remote Mode Setup
8. Remote Controller Setup
TV
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TV/CD
8–1. Remote Mode Setup
TV
TV/DVD
TV/VCR
8–1. Remote Mode Setup
TV
5
Use / to select category, and then press
ENTER.
The brand name input panel appears.
6
Use // / to select a character, and then press
ENTER.
Repeat this step from the 1st character to the 3rd
character of the brand name.
When you have entered the 3rd character, select
“Search” and press ENTER.
After searching, a list of the brand name appears.
If the brand name is not found:
Use to select “Not Listed”, and then press
ENTER.
The brand name input panel appears.
7
Use / to select brand, and then press ENTER.
After searching, a remote control code and the input
procedure appear. Try it.
8
If you can control component, use / to select
“Works”, and then press ENTER.
The “Remote Mode Setup” menu appears.
If you cannot control component, use / to select
“Doesn’t work (try next code)” and press ENTER.
The next code is appear.
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
1234567890 &@
–
Space
Back Space
Search
8–1. Remote Mode Setup
TV
Category
Brand
TV
8–1. Remote Mode Setup
TV
Category
TV
Not Listed
Sonawa
Sonber
Songba
Sonic
Soniko
8–1. Remote Mode Setup
TV
Code 11339
1. While holding down Remote Mode [TV],
press and hold down [DISPLAY] (3 seconds).
2. Enter the 5-Digit remote control code.
3. Push some key to see if the TV responds.
4. Push Remote Mode [RECEIVER].
5. Choose “Works” or “Doesn’t work”.
Works
Doesn’t work (try next Code)
Remote control code
(Number of search results)