Filter
Top Products
Advanced Settings
26
2.Speaker Setup
Allows you to change the speaker configuration such as existence of subwoofer, crossover
frequency, and so on. Settings are automatically configured if you use the Automatic
Speaker Setup.
Furthermore, you will not be able to select this setting if you have a pair of headphones
connected or you are listening through your TV speakers.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection
and height speaker type.
Setting item Default Value Setting Details
Speaker
Impedance
6ohms Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers
have 4 ŝ or more to less than 6 ŝ impedance
"6ohms": When the connected speakers all have 6
ŝ or more impedance
Front Speakers
Type
Normal Select the type of front speaker connection.
"Normal": When front speakers are connected in a
normal manner
"Bi-Amp": When front speakers are bi-amp
connected
Height Speakers
Type
Not Use Set the type of speakers connected to
SPEAKERS BACK or HEIGHT speaker terminals.
Select from the following options according to the
type and layout of the connected speakers: "Not
Use", "Front High", "Top Front", "Top Middle",
"Dolby Enabled Speaker (Front)", or "Dolby
Enabled Speaker (Surround)".
r If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "Not Use".
r "Dolby Enabled Speaker (Surround)" cannot
be selected if "Speaker Configuration" -
"Surround" is set to "None".
Setting item Default Value Setting Details
Powered Zone 2 No Set presence of speaker terminal connection of
Zone 2.
"Yes": When speakers are connected to ZONE2
speaker terminals
"No": When speakers are not connected to
ZONE2 speaker terminals
r If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "No".
r For impedance, check the indications on the back of the speakers or their instruction manual.