Filter
Top Products
Advanced Settings
32
Setting item Default Value Setting Details
Dolby EX Manual If the source signal contains a Dolby EX flag,
the Dolby Digital EX listening mode or THX
Surround is automatically selected.
"Auto": Use this function
"Manual": Select the desired listening mode
• In the following cases, the setting cannot be
changed:
– "Back" is set to "None" in "Speaker
Configuration".
– "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Loudness
Management
On Enable the Late Night function that allows you to
enjoy surround sound of Dolby TrueHD playback
even in low volume.
"On": Use this function
"Off": Do not use this function
• Depending on the setting of "Back" in "Speaker Configuration", the display will be changed. "PLllx" will
be displayed as "PLllx/PLII"
DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting item Default Value Setting Details
Neo:6 Music
Center Image
2 Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center while
selecting a larger value spreads the sound field of
the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting item Default Value Setting Details
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
• Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.