Filter
Top Products
Step 3:
Playing Back
10
1
Playing the player and TV
Press RCV on the remote controller and press
1
z
RECEIVER to turn the power on.
r Switch the input on the TV to that assigned to the unit.
Use the TV's remote controller.
1.
Select the input of the unit and start playback on the
player or TV.
r Press
2
INPUT SELECTOR to which the desired
player has been assigned. Press TV/CD to play the
TV's sound. You can also use the input selector
buttons on the main unit.
r Input will automatically be selected if the TV or player
is CEC compliant and connected to the unit with
HDMI cable.
2.
Select the desired listening mode.
Press the
5
listening mode buttons to switch the mode
so that you can enjoy different listening modes. For
details about the listening modes, see "Listening modes"
on the next page.
3.
Adjust the volume with
9
.
Remote controller parts name
z
To control the unit: The remote controller may be in the
remote mode that enables control of other devices. Press
the
2
RCV button to select the RECEIVER mode (for
controlling this unit) before starting operation.
1
9
8
F
H
G
4
6
2
3
5
7
1
z
RECEIVER button: Turns the unit on or into standby
mode.
2
REMOTE MODE/INPUT SELECTOR buttons: Switches
the input to be played.
3
Cursor buttons and ENTER button: Moves the cursor
and confirms the selection.
4
Q SETUP button: Displays the Quick Setup menu that
allows you to set the frequently used functions including
input selection and volume adjustment.
5
Listening mode buttons: Allows you to select the
listening mode.
6
DIMMER button: Switches the brightness of the display.
7
ZONE2 button: For use when the unit is connected with
a pre-main amplifier in a separate room and sound is
played there.
8
MUTING button: Temporarily mutes audio.
9
VOLUME buttons: Allows you to adjust the volume.
F
RETURN button:
Returns the display to the previous state.
G
HOME button:
Displays the Home menu that allows you to
make advanced settings and use Internet radio and DLNA.
H
DISPLAY button:
Switches the information on the display.
How to use the remote controller
Batteries (AA/R6)
Remote control sensor
Approx.
16 ft. (5 m)
AV receiver
r If you do not use the remote controller for a long time,
remove the batteries to prevent leakage.
r Note that keeping consumed batteries inside may cause
corrosion resulting in damage of the remote controller.