Filter
Top Products
13
Making antenna connections
Connecting the FM indoor antenna:
The FM indoor antenna is for indoor use only. Extend the antenna
and move it in various directions until the clearest signal is
received. Fix it with push pins or similar implements in the posi-
tion that will cause the least amount of distortion.
If the reception is not very clear with the attached FM indoor
antenna, the use of an outdoor antenna is recommended.
Connecting the AM loop antenna:
The AM loop antenna is for indoor use only. Set it in the direction
and position where you receive the clearest sound. Put it as far
away as possible from the unit, TVs, speaker cables, and power
cords.
When reception is not satisfactory with the attached AM loop
antenna alone, connection of an outdoor antenna is recommended.
Please make sure that you follow the considerations below regard-
ing the location.
Keep the antenna away from noise sources (neon signs, busy roads,
etc.).
It is dangerous to put the antenna close to power lines. Keep it well
away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock, grounding is
necessary. Follow item 14 of the “Important Safeguards” on
page 2 when you install the outdoor antenna.
The outdoor antenna will be more effective if it is stretched hori-
zontally above a window or outside.
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock, grounding is
necessary. Follow item 14 of the “Important Safeguards” on
page 2 when you install the outdoor antenna.
Connecting the included antennas
Connecting an FM outdoor antenna
Connecting an AM outdoor antenna
AM
FM
75
ANTENNA
Outdoor
antenna
AM
FM
75
ANTENNA
AM
FM
75
ANTENNA
U.S. and Canadian
models
Other models
AM
FM
75
ANTENNA
Remove the insulation at the
tip of the cable, and insert the
cable securely, fully to the end
of the exposed tip.