Filter
Top Products
10
Receiving stations
In order to listen to a radio broadcast, first tune in the radio station,
then set it. The radio station can be selected in two ways: by using the
auto-tuning function or by directly entering the station’s frequency.
When tuning in the radio station, refer to page 12 for more informa-
tion on how to get the best reception possible.
1. (For models other than European models) Use the BAND button
to select either FM or AM.
2. (When selecting an FM station) Use the ANTENNA button on
the remote control to select the antenna.
3. Press the PRESET/TUNING button until Tuning Mode is
selected.
● With each press of the button, the mode changes one at a time in
the following sequence:
Continue pressing the PRESET/TUNING button until “TUN-
ING” appears on the display.
● When using the remote control, press the TUNING a/b buttons.
4. Tune in the station.
To tune in a station using the PRESET/TUNING dial:
Turn the PRESET/TUNING dial either clockwise or counterclock-
wise to begin auto-tuning. Once a station is tuned in, auto-tuning
will stop. When using the remote control, hold down the TUNING
a or b button for more than 0.5 second to begin auto-tuning.
● To select another station, turn the PRESET/TUNING dial again
and the next station will be tuned in.
● If the station’s frequency is weak and auto-tuning is not be able
to tune it in, refer to page 12.
To tune in a station by directly entering the station’s fre-
quency:
Use the number buttons to enter the station’s frequency.
● For example, if the station frequency is 88.10 MHz, press 8
twice, then press 1, and then 0.
● If no radio station can be received at the entered frequency, the
unit will decrease the frequency until the station nearest to the
entered frequency is received.
● If you have accidently entered the wrong frequency, try entering
the correct frequency again.
5. Press the MEMORY button. The MEMORY indicator will
light up and the number of an available preset channel will
flash on the display.
6. Use the GROUP buttons to select the group in which you wish
to preset the station.
You can select from A, B, C or D.
(Continued on page 11)
Tuning the radio and presetting stations
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW HI-BLEND AUTO
MEMORY
DISPLAY GROUP SCAN
GROUP
Remote control
or
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW HI-BLEND AUTO
MEMORY
MEMORY
MEMORY
Remote control
or
2
1
3
4
5
6
BAND
ANTENNA
A B
ANTENNA
Remote control
PRESET/
TUNING
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
PRESET / TUNING
6
9
5
87
3
4
1
2
0/10
TUNING
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW HI-BLEND AUTO
Remote control
or or
Remote
control
PRESET → TUNING → CHARACTER
T-4711
1 (other than Europe) 6
5, 8
3 4, 7
2
4
5, 8
6
4
7