Filter
Top Products
8
Remote Controller
BAND button (14)
This button can be used to select the FM or AM
band.
If the T-4355 and A-9355/A-9155 are connected
with an cable, pressing this button while the
entire system is on Standby will turn on only the
T-4355 and A-9355/A-9155. All other components
will remain on Standby.
FM MODE button (18)
This button can be used to set the FM mode to ste-
reo or mono.
PRESET [+]/[–] buttons (18)
When the input source on the A-9355/A-9155 is set
to TUNER, these buttons can be used to select pre-
sets.
TUNING [ ]/[ ] buttons (18)
When the input source on the A-9355/A-9155 is set
to TUNER, these buttons can be used to tune into
stations.
* Any remote controller for Onkyo amplifier is avail-
able to control T-4355 in a condition of the connec-
tion. (On some remote controllers, some buttons shown
in the figure are missing. The corresponding functions
cannot be controlled by the remote controller.)
RC-627S Remote Controller (supplied with the A-9355/A-9155 Integrated Ampli-
fier)