Filter
Top Products
6
Front & Rear Panels
The actual front panel has various logos printed on it.
They are not shown here for clarity.
For detailed information, see the pages in parentheses.
A STANDBY/ON button (30)
This button is used to set the AV receiver to On or
Standby.
B STANDBY indicator (30)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C Remote-control sensor (9)
This sensor receives control signals from the remote
controller.
D STEREO button (44)
This button is used to select the Stereo listening
mode.
E LISTENING MODE [ ]/[ ] buttons (44)
These buttons are used to select the listening modes.
F Display
See “Display” on page 7.
G DISPLAY button (35)
This button is used to display various information
about the currently selected input source.
H DIGITAL INPUT button (31)
This button is used to assign the digital inputs and
specify the format of digital input signals.
I DIMMER button (42)
This button is used to adjust the display brightness.
J MEMORY button (41)
This button is used when storing or deleting radio
presets.
K TUNING MODE button (36)
This button is used to select the Auto or Manual tun-
ing mode for AM and FM radio.
L Arrow/TUNING/PRESET & ENTER buttons
When AM, FM, or XM is selected, the TUNING
[ ] [ ] buttons are used to tune the tuner, and the
PRESET [ ] [ ] buttons are used to select radio
presets (see page 41). When the setup menus are
used, they work as arrow buttons and are used to
select and set items. The ENTER button is also used
with the setup menus.
M MASTER VOLUME control (34)
This control is used to set the volume of the AV
receiver to MIN, 1 through 79, or MAX.
N PHONES jack (43)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
O SPEAKER A & B buttons (34)
These buttons are used to turn speaker sets A and B
on or off.
P TONE, [–] & [+] buttons (42)
These buttons are used to adjust the bass and treble.
Q Input selector buttons (34)
These buttons are used to select the following input
sources: MULTI CH, DVD, VIDEO 1, VIDEO 2,
VIDEO 3, TAPE, TUNER, or CD.
The [MULTI CH] button selects the multichannel
DVD input.
R RETURN button
This button is used to return to the previously dis-
played setup menu.
S SETUP button
This button is used to access various settings.
T VIDEO 3 INPUT (25, 50)
This input can be used to connect a camcorder,
games console, and so on. There are jacks for com-
posite video and analog audio.
Front Panel
AUDIO
LR
TONE
+
STEREO
LISTENING MODE
DISPLAY
DIGITAL INPUT
DIMMER MEMORY
TUNING MODE
RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES
MULTl CH DVD VIDEO 1 VIDEO 2
VCR
VIDEO 3 TAPE TUNER CD
VIDEO
VIDEO 3 INPUT
MASTER VOLUME
A SPEAKERS B
1
QO P R S
2
3 4 5 7 8 9 J K L M6
TN