Filter
Top Products
35
SN 29343138 TX-L5.E
To record the input source signal you
are currently watching or listening to
Recording of video and/or audio signals can be performed on
the components connected to the VIDEO 1 OUT, HD OUT
(audio only) and MD/TAPE OUT (audio only) jacks.
Recording a source
Recording the video from one source
and the audio from another
You can add the sound from one source to the video of
another source to make your own video recordings.
Below is an example of recording the sound from a MD player
connected to MD/TAPE L/R jacks and the video from a video
camera connected to VIDEO 2 IN VIDEO jack to video
cassette tape in a video cassette recorder connected to the
VIDEO 1 OUT L/R and VIDEO jacks.
VIDEO
IN
IN
OUT
IN
IN
OUT
IN
DVD/CD
MON
OUT
DVD /CD
L
R
IN
AUDIO
VIDEO 1
VIDEO 2
MD/TAPE
OUT
IN
OUT
IN
OUT
IN
IN
HD
DVD /CD
L
R
VIDEO 1
VIDEO 2
V
VIDEO 1
Video
camera
MD player
Video cassette
recorder
Insert a MD in the MD player and
insert a tape in the video camera
connected to the VIDEO 2.
Insert a video tape for recording in
the video cassette recorder
connected to VIDEO 1 OUT.
Press VIDEO 2 on the remote
controller.
Press MD/TAPE on the remote
controller.
This switches the audio output to MD, but
the video output remains VIDEO 2 that has
been selected in step 3.
Start recording on the video
cassette recorder and start playing
at the MD player and video camera
as desired.
The recorded video signal becomes the
output from the video camera and
recorded audio signal becomes that from
the MD player.
Notes
• You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
• If you change the input source during recording, you will record
the audio signals from the newly selected input source and the
video signals assigned to that input source.
• You cannot record the surround effects.
1
2
1
2
3
4
5
VIDEO
2
VIDEO
1
DVD/CD
HD
MD/TAPE
INPUT SELECTOR
VIDEO
2
VIDEO
1
DVD/CD
HD
MD/TAPE
INPUT SELECTOR
VIDEO
2
VIDEO
1
DVD/CD
HD
MD/TAPE
INPUT SELECTOR
Press an input selector button to
select the input source to record.
The input source is now selected and you
may watch or listen to it as desired. The
currently selected input source signal to
the VIDEO 1 OUT, HD OUT and MD/TAPE
OUT outputs for recording.
Start recording at the recording
component as desired.
Notes:
• You can record analog audio, but not digital audio. Make sure
that you have made a correct analog connection.
• If you change the input source during recording, you will record
the signals from the newly selected input source.
• You cannot record the surround effects.
SUBWOOFER MODE
SURROUND STEREO
ACOUSTIC
CONTROL
TUNING/PRESET
DVD
/
C
D
VIDEO
1
VIDEO
2
HD MD
/
TAPE
FM AM
INPUT
VOLUME
AV RECEIVER
TX
-
L
5
MEMORY
FM MODE
DISPLAYVIDEO
2
VIDEO
1
DVD/CD
DIMMER
HD TUNER
MD/TAPE
DVD MD
STANDBY
ON
MENU
TOP MENU
SETUP
SURR MODE
STEREO SP SETUP SW MODE
RETURN
P
R
E
S
E
T
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
INPUT dial
INPUT
SELECTOR
Remote controller
Unit
INPUT