Filter
Top Products
14
Speaker Package
For detailed information, see the pages in parentheses.
■ Front
■ Rear
STANDBY/ON indicator
With the Auto Standby function, the SKW-570
automatically turns on when an input signal is
detected in Standby mode. When there’s no input
signal for a while, the SKW-570 automatically
enters Standby mode.
OUTPUT LEVEL control (44)
This control is used to adjust the volume of the
subwoofer.
LINE INPUT (20)
This RCA input should be connected to the
subwoofer pre out on the AV receiver with supplied
RCA cable.
Note:
The Auto Standby function turns the subwoofer on when
the input signal exceeds a certain level. If the Auto
Standby function does not work reliably, try slightly
increasing or decreasing the subwoofer output level on
the AV receiver (page 72).
Subwoofer (SKW-570)
To AC outlet
Red: Subwoofer in standby mode
Blue: Subwoofer on
HT-S5200_En.book 14 ページ ２００９年３月９日 月曜日 午後４時３１分