Filter
Top Products
8
Front & Rear Panels
For detailed information, see the pages in parentheses.
A
STANDBY/ON button (36)
This button is used to set the AV receiver to On or
Standby.
B
STANDBY indicator (36)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C
Remote-control sensor (19)
This sensor receives control signals from the remote
controller.
D
STEREO button (49)
This button is used to select the Stereo listening
mode.
E
LISTENING MODE [ ]/[ ] buttons (49)
These buttons are used to select the listening modes.
F
Display
See “Display” on page 9.
G
DISPLAY button (41)
This button is used to display various information
about the currently selected input source.
H
DIGITAL INPUT button (37, 57)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
I
DIMMER button (46)
This button is used to adjust the display brightness.
J
MEMORY button (43)
This button is used when storing or deleting radio
presets.
K
TUNING MODE button (42)
This button is used to select the Auto or Manual tun-
ing mode.
L
Arrow/TUNING/PRESET & ENTER buttons
(38, 52, 55)
When the AM or FM input source is selected, the
TUNING [ ] [ ] buttons are used to tune the
tuner, and the PRESET [ ] [ ] buttons are used
to select radio presets (see pages 42, 43). When the
setup menus are used, they work as arrow buttons
and are used to select and set items. The ENTER
button is also used with the setup menus.
M
MASTER VOLUME control (40)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 79, or MAX.
N
PHONES jack (46)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
O
SPEAKER A & B buttons (40)
These buttons are used to turn speaker sets A and B
on or off.
P
TONE, [–] & [+] buttons (46)
These buttons are used to adjust the bass and treble.
Q
Input selector buttons (40, 41)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VIDEO 1/VCR,
VIDEO 2, VIDEO 3, TAPE, TUNER, or CD.
The [MULTI CH] button selects the DVD analog
multichannel input.
R
RETURN button (38, 52, 55)
This button is used to return to the previously dis-
played setup menu.
S
SETUP button (38, 52, 55)
This button is used to access various settings.
Front Panel
TONE
+
STEREO
LISTENING MODE
DISPLAY
DIGITAL INPUT
DIMMER MEMORY
TUNING MODE
RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
MASTER VOLUME
A SPEAKERS B
1
QN O P R S
2
3 4 5 7 8 9 J K L M6