Advanced Operations
En-49
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN, you must assign “IN1” to the
“BD/DVD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,
EXTRA1, EXTRA2
`IN1:
Select the input to which the component has been
connected.
`-----:
Output composite video sources from the HDMI
output.
Tip
•“EXTRA1” and “EXTRA2” can be selected as input sources in
“Input” of “Quick Setup” (➔ page 43).
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign “OPTICAL1” to the “TV/CD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,
EXTRA1, EXTRA2
`COAXIAL1, COAXIAL2, OPTICAL1,
OPTICAL2:
Select the input to which the component has been
connected.
`-----:
Select if the component is connected to an analog
audio input.
Tip
•“EXTRA1” and “EXTRA2” can be selected as input sources in
“Input” of “Quick Setup” (➔ page 43).
Note
• When an HDMI IN is assigned to an input selector in
“HDMI Input” (➔ page 48), the same HDMI IN will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “Audio Selector” (➔ page 57).
• Supported sampling rates for PCM signals (stereo/mono) from a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16,
20, 24 bit.
Input selector Default assignment
BD/DVD - - - - -
CBL/SAT IN1
GAME -----
PC -----
AUX - - - - -
TV/CD -----
EXTRA1 - - - - -
EXTRA2 - - - - -
Input selector Default assignment
BD/DVD COAXIAL1
CBL/SAT COAXIAL2
GAME OPTICAL1
PC -----
AUX -----
TV/CD OPTICAL2
EXTRA1 -----
EXTRA2 -----