Filter
Top Products
20
XIII. The NV-RC2 IR Remote Control
(Fig. 13)
The Essentia System comes with the RC2 remote con-
trol. This remote allows wireless control of all of the
keypad functions, as well as the functions of the NuVo
T3 Tuner. The four-backlit buttons at the top of the
remote allow you to choose which device the remote
will control. The numeric keypad is used to choose the
desired audio source, or tuner preset.
The RC2 remote is an ideal tool for teaching the NuVo
System functions to a universal learning remote con-
trol that can then operate the Essentia system as well
as all the individual source functions.
XIV. Changing the Buttons on the
Essentia Keypad (Fig. 14)
The Essentia keypads ship with 36 preprinted inter-
changeable source buttons. This allows you to easily
customize each keypad to match the audio components
being used in the system.
To change the buttons use a small screwdriver to
remove the outer Decora insert. This exposes two inner
plates that hold the buttons in place. Those are also
removed with a small screwdriver, allowing you to
remove and replace the desired source buttons.
Line up the tabs on the replacement buttons with the
corresponding holes in the keypad’s circuit board.
Once the new buttons are in place return the inner
plates and the outer keypad insert.
Fig. 13: NV-RC2 IR Remote Control
Fig. 14
NV-RC2 Remote Learning Remote
ON
OFF
ALL
OFF
CD1
CD2
TNR1
TNR2
TNR3
SAT
VOLUME
LED12
LED13
LED14
LED15
LED16
LED17
LED18