Filter
Top Products
CDN-88 Dual CD Player
- The Leader in DJ Technology
©2000 Numark Industries
- 15 -
http://www.numark.com
PROGRAM FUNCTIONS
This button provides several programmable functions depending upon the combination of buttons used.
Track Sequence Program - Depress
while the unit is stopped and the program indicator will light. Select each track to be
programmed
and press between selections. Press to start the track program. To exit and erase program hold
for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
End of track dead space elimination – holding down
and pressing will show and option for eliminating the dead space at the
end of tracks. This is useful if you are playing a CD continuously and want to eliminate the gaps between songs. The unit will startup with
this in the off position. The display will indicate “0 space” when the function is set to eliminate space. Setting this function on one side will
affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.
Relay time - holding down
and pressing will show options for the amount of time used for relaying between tracks. Options will
appear to relay immediately after the track (0), with time added of 1,2,or 3 seconds(1,2,3), or a reduction of 1,2, or 3 seconds (-1,-2,-3). By
reducing time the tracks will crossover before the end of a track, creating an automatic segue from master to slave. This feature will also
work in track sequence program mode; however, if the sides are also in SINGLE mode the same number of tracks programmed should be
the same. Play will stop at the end of the last track. Setting this function on one side will affect both sides. This way you can enable the
function while CD 1 is playing by using CD 2.
FREE WHEEL CUE – holding down
followed by will alternate the jog wheel between free wheel and non free wheel mode during
cue operations. The sound during wheel rotation can be adjusted from a smooth “scratch” sound to the tradition “stutter” sound. The
display will indicate FREE WHEEL when the “scratch” sound is active. This indication will go away when the style of cue is stutter. This
setting will be remembered at power down.
Automatic door close protection – holding down
followed by will adjust this option. The display will indicate 30 seconds, 60
seconds, 120 seconds, and (--) for no auto close. This setting will be remembered at power down. Setting this function on one side will
affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.
Digital Output – In order for the digital output to work the output must be turned on. To turn this on holding down
followed by
.
When this is active digital out will turn on and all pitch and loop functions will disengage.
Smart Looping
-
To active smart looping hold down followed by at the same time. After this has been done all loop points and
stuttering will follow the beat of the music.
SPECIFICATIONS
TECHNICAL:
Quantization 16-bit linear/channel, 3 beam laser
Oversampling rate 8 times
Frequency response 20Hz-20KHz
Channel separation 86dB
T.H.D. + NOISE 0.01%
S/N ratio (IHF-A) 94dB
Output level 2.0Vrms
Short access time
(Play next track) less than 1.7sec
Long access time
(Track 1 ->Track 20) less than 3sec
Digital Output type 2, form 1, S/PDIF
(Sony/Phillips Digital Interface Format)
GENERAL:
Environmental:
Operating Temperature 5-35 deg. C
Humidity 25 to 85% RH (non-condensing)
Storage Temperature -20 to 60 deg. C
Dimensions:
Main Unit: 482(W) x 88.8(H) x 264(D) mm (without feet)
19(W) x 3 1/2(H) x 10 3/8(D) inches (without feet)
Control Unit: 482(W) x 88.8(H) x 74(D) mm (without feet)
19(W) x 3 1/2(H) x 2 7/8(D) inches (without feet)
Weight: Player Unit: 5 Kgs., 11 lbs.
Control Unit: 2 Kgs., 4.4 lbs.
Power Supply: 115/230V AC, 50/60Hz
Power Consumption: 25W