Filter
Top Products
Connections
Single Stereo Subwoofer
A four conductor (Left+, Left-, Right+ and
Right-) wire 16 gauge or larger (see side-
bar on speaker wire gauge) is run from the
amplifier location to the local volume
control (See Figure 4).
From the local volume control the four
conductor cable is run to the CM8SW and
connected to the Input connectors. A two
conductor wire is connected to each of the
stereo outputs and fed to the left and right
speakers. Now, the volume control will
raise and lower the volume for the sub-
woofer and the left and right speakers
simultaneously. Additionally, the crossover
is now connected so that the crossover
switches can be adjusted.
Dual Subwoofer Systems
A four conductor (Left+, Left-, Right+ and
Right-) wire 16 gauge or larger (see side-
bar on speaker wire gauge) is run from
the amplifier location to the local volume
control
(See Figure 5).
From the local volume control a two con-
ductor cable is run to each of the CM8SWs
and connected to either the left or the right
Input connectors.
Each of the satellite speakers must be con-
nected to the correct subwoofer. Typically,
a two conductor wire is connected to one
of the outputs on the left channel sub-
woofer and fed to the left satellite speaker
and another two conductor wire connects
the right channel subwoofer and satellite.
Now, the volume control will raise and
lower the volume for the subwoofer and
5
Connections
Left Right
CM8SW CM8SW
Wire to
Corresponding
Output
E
ither Input okay
Satellite Speaker
Amplier
Satellite Speaker
Left Right
CM8SW
Amplier
Left and Right
No-Strip wire input terminals
Left and Right
No-Strip wire output terminals
Satellite SpeakerSatellite Speaker
Figure 4
A Single CM8SW Hook-Up
Figure 5
A Dual CM8SW Hook-Up