Filter
Top Products
Features and Benefits
TCC Speaker Cone
The Niles CM8SW is a high-performance
passive subwoofer that compliments the
entire Niles ceiling mount loudspeaker
line. It’s dual voice-coil injection molded
TCC (talc, carbon and ceramic) woofer
provides outstanding bass response
High-Power Handling
The CM8SW employs an exceptionally
heavy-duty magnet/voice-coil/spider
assembly that is capable of handling high
power amplifiers (up to 150 watts).
2
Features and Benefits
New Construction Bracket serves as
a “hole saver” when drywall has not
been applied. It is not necessary when
retrofitting to existing ceilings.
Knockout wire tie allows
the wire to be secured to
the bracket throughout the
new construction process.
It knocks out cleanly when
the speaker is installed.
New construction
wings instantly snap
into the bracket
without screws.
Wings are scored for
easy size trimming.
Brackets and wings
attach to the ceiling joists
with nails or screws.
Rust-proof aluminum Grilles make the
CM8SW series perfect for moist
environments.
Frames are molded with
a slight texture to assure
good paint adhesion.
Dogs swivel 9
0°, then
clamp the speaker
frame to the drywall.
Mounting screws tighten
the “Dogs”, clamping the
speaker to the drywall
The CM8SW ceiling mount subwoofer includes an
easy access, baffle mounted high pass filter to
prevent over-excursion of the satellite’s woofers.
The CM8SW ceiling mount subwoofer includes
an easy access, baffle mounted low pass fre-
quency selection switch.
Figure 1
Model CM8SW Shown
The illustration below shows how
a typical Niles CM loudspeaker
mounts into a ceiling.
Figure 2 Figure 3
1
00Hz
140Hz
FULL
CUT
SUB
SAT