Filter
Top Products
Thank you for your purchase of the NHT 6.2 Ci in-wall loudspeaker. Please take a few minutes to read through this
Owner's Manual prior to installing your new speakers. The information provided will help you to obtain maximum perfor-
mance from your audio system. If you have questions or need assistance at any time during the installation or operation
of your new speakers, please call your NHT Dealer or our Toll-Free Customer Hotline at:
1-800-NHT-9993
Design
NHT loudspeakers are designed to deliver refined, musical sound from attractive and affordable packages. Our efforts are
guided by the study of human hearing and are optimized for real-world use. Every NHT speaker undergoes rigorous
testing and quality control at the factory to ensure you years of listening pleasure.
The NHT 6.2 Ci's custom-designed drive units are mounted in a rigid baffle/bezel assembly designed to minimize the
audible effects of unwanted vibrations and resonance. The baffle is ¾" MDF, the same material used in high quality box
speakers. It is separated from the bezel by absorptive materials designed to prevent the coloration of critical midrange
frequencies caused by wall vibration. The mounting assembly is designed to be intuitive and flexible, making it ideal for
new or existing construction. With high performance sonics and a paintable face, the 6.2 Ci is the perfect solution for
architectural audio and home theater installations.
Caution: The 6.2 Ci should be installed by an experienced and licensed custom installation professional. Be sure that the
installer possesses sufficient skill, the proper tools, knowledge of local fire and building codes, and a familiarity with the
structure of the building (especially wall and/or ceiling materials, layouts, electrical and plumbing lines, etc.).
Placement
The 6.2 Ci is designed for in-wall installation, oriented vertically
between standard 2" x 4" wood studs. Installation in outdoor
locations or in moisture-prone interior environments such as indoor
swimming pools or saunas is not recommended.
Spend some time considering speaker placement prior to installing
the 6.2 Ci. Once the speakers are installed, they are permanent, so
their location should be selected carefully. Mount the speakers in a
location where they face the listening area without obstruction from
furniture, and are preferably at least three feet from side walls. The
speakers should be mounted on a flat surface to ensure a good seal
between the bezel and the mounting surface. For optimal imaging,
position the speakers so that the distance between the listening
position and the wall is 1.5 times the distance between the two
speakers (fig.1). If possible, position the speakers so that the aver-
age ear height of the listeners in the room falls between the center of
6.2 Ci Specifications
· System Type: 2-way in-wall design
· Driver Complement: (2) 6.5" long-throw polypropylene woofers, 1" fluid-cooled aluminum dome tweeter
· Crossover: 2.0KHz, 18dB/octave high-pass and 12dB/octave low-pass
· Response: 40Hz - 20KHz, +/-3dB
· Sensitivity: 88.5db (2.83V at 1M)
· Impedance: 6 ohms.
· Recommended Amplifier Power: 20w/ch. min., 150w/ch. max.
· Inputs: Professional grade spring posts
· Weight: 10 lbs. each
· Dimensions: Cutout 19.75"H x 8.88"W; Bezel 20.85"H x 9.95"W; Depth behind wall 3”
· Finish: Matte white (paintable)
Specifications are subject to change without notice, in accordance with our policy of continuously upgrading the performance of our products.
fig.1