Filter
Top Products
Windows Setup 4-33
Step 9: Create Volume
For NEC Express5800/ft series, you need to create mirrors for all volumes. In case of creating a new
volume except for the one that stores the system partition, see “Hard Disk Configurations that can
be built on the NEC Express5800/ft series”on the separate User’s Guide.
For how to create or mirror volume, see the Online Help of Windows and “Step 6: Set Dual Disk
Configuration” (page 4-29).
IMPROTANT:
The creation of volume is available after the system opeation is started.
For creating volume, refer to “Hard Disk Configurations that can be built on the NEC
Express5800/ft series” in the separate User’s Guide.
Step 10: Set Network for NEC ESMPRO Agent
NEC ESMPRO Agent is required for continuous operation of the NEC Express5800/ft series. It is
automatically installed when installing OS using Express Setup.
To operate NEC ESMPRO Agent, you need to set the SNMP.
To change the settings of the SNMP Service:
1. Double-click [Administrative Tools] in [Control Panel].
2. Open [Services] in [Administrative Tools].
3. Select [SNMP Service] from the service list and then [Properties] in the [Action] menu.
The “SNMP Properties” dialog box appears.
4. Enter “public” in the [Community name] box in the [Traps] property sheet and click the
[Add to list] button.
IMPORTANT:
To change the community name of traps to be received from the default “*” in the
NEC ESMPRO Manager site, enter the same name as the community name newly
set in the NEC ESMPRO Manager site.
To receive trap from NEC ESMPRO Agent at the NEC ESMPRO Manager
machine, both community names should be the same.
5. Click the [Add...] button in [Trap destinations]. After entering the IP address of the NEC
ESMPRO Manager machine of the send destination in the [Host name, IP or IPX address]
box, click the [Add] button.
IMPORTANT: If the IP address (or host name) of the remote NEC ESMPRO
Manager specified as the trap send destination in the setup of the manager report
(TCP/IP), the message warning the duplication appears. The specification of the same
NEC ESMPRO Manager causes to be reported doubly.