Filter
Top Products
10 VHF 7000, 7100US, 7100EU Operation Manual
NAVMAN
+ CH - Channel Select. Also on the microphone. The current channel is shown on
the screen in BIG digits with an appropriate designator sufx A or B in small
letters below the channel number.
Press + or - to step through the available channels one at a time, or hold
down to scroll rapidly through all the available channels. See Appendix C for
a listing of channel charts.
Alphanumeric Entry. This key can also be used for menu selection and for
alphanumeric entry. Press + or - to scroll the cursor up or down menu options
when navigating menus.
When editing an item containing only numbers, press - to count through the
numbers or hold down to scroll rapidly.
To enter a character, press + to step through the alphabet or hold down to
scroll rapidly.
ENT Enter. Use ENT when navigating menus, to conrm entries and edits.
ESC Escape. Use ESC when navigating menus, to clear incorrect entries, to
exit from a menu without saving changes, and to back up to the previous
screen.
CALL/MENU DSC Setup Menu and DSC Call Menu. 7100US and 7100EU only. Press to
enter the DSC Call Menu and make DSC calls. See Section 5.
Hold down to enter the DSC Setup Menu and customize your radio. See
Section 4.
MENU Radio menu. 7000 only. Press to enter the Radio Menu and customize your
NAVMAN VHF radio. See Section 3.
DISTRESS Send DSC Distress Call. 7100US & 7100EU only. See Section 6
.
PTT Press To Talk. Press PTT to transmit at any time on an allowable channel.
This automatically exits you from menu mode and stops scanning. You must
release PTT to receive a signal.
If PTT sticks, a built-in timer will automatically shut down a transmission after
ve minutes and sound the error beeps.