Filter
Top Products
28
Stereo Music System
Other Functions
Disc 1Disc 2Disc 3Standby Sleep
ST
Preset
FMAM
Disc Track Remaining Time
Memory No.
Memory Repeat
Random
Loud.Vol.
3 Disc MusicBank
System
Sleep function
Each time you press the Sleep button, the time until the unit
automatically goes on standby is changed to the next step in
the sequence 10 minutes/20 minutes/30 minutes/60 minutes/
90 minutes/120 minutes/end sleep mode.
- To end sleep mode, press the Sleep button again.
- When setting sleep with the sub remote control, press and
hold down the Sleep button (for at least about 1 second).
You can change the setting time by repeatedly pressing the
Sleep button after the time is displayed. To end sleep mode,
press and hold down the Sleep button (for at least about 1
second).
Audio timer
You can use any commercially available audio timer to switch
on the power at the set time.
1. Select the source. (When selecting CD, put the CD player
on playback or pause.)
2. Adjust the volume and tone.
3. With the audio timer, set the time at which the power will
come on.
- If the audio timer is set with CD playback stopped, the
power comes on with the unit in CD mode, but the CD is
not played back. Be sure to set the audio timer with CD
player on playback or pause.
Display section
Main Unit (Front)