11
Stereo Music System
Connections
AM antenna connection
1. Assemble the supplied AM loop antenna.
2. Connect the loop antenna lead to the AM Antenna terminal.
3. Move the loop antenna around and install it in the location
with optimum reception sensitivity.
- If reception condition with the supplied AM loop antenna
are not satisfactory, extend an antenna wire (ordinary vi-
nyl-coated lead wire) about 4 to 5 meters outdoors and
connect the end of the wire to the AM antenna terminal
marked “AM”. The loop antenna should remain connected
also when using an outdoor antenna.
CAUTION
If an outdoor AM antenna is used, grounding must be pro-
vided for protection against lightning.
FM
Antenna
AM Antenna
75Ω
Unbal.
GNDGND Loop
Supplied AM loop antenna
AM wire antenna
Ground
Establishing a ground connection
1. Provide a single-conductor wire (ordinary vinyl-coated lead
wire) and connect one end of the wire to the AM antenna
terminal marked "GND".
2. Connect the other end of the wire to an earth ground, for
example more than 50 cm length of exposed wire or a metal
bar buried in the ground, or a water pipe (lead pipe) with
complete grounding.
CAUTION
Never connect the ground wire to a gas pipe to avoid ex-
plosion hazard in case of a lightning strike.