Filter
Top Products
8 1. Basic Setup and Operation
Setting Up and Using TV inputs, continued
Setting Up Inputs with Auto Input Sensing
Connection information starts on page 13. Learn more
about Auto Input Sensing on page 24.
1, Power on the TV.
Power on the devices to ensure detection.
3, Connect one device to the TV, making note of the
TV input jack.
The TV will display the New Device Found screen if
the connection type is detectable.
4, Highlight the device type in the on-screen list and
press ENTER.The name you select here will appear
in the Input Selection menu.
Sample New Device Found screen,
More About the input Selection Menu
• To assign helpful names to the icons, see the
Inputs > Name menu.
• To remove unwanted Antenna or HDMI device icons
from the Input Selection menu, see the Inputs >
Name menu.
• To rearrange the icons, use the Inputs > Order
menu.
Detailed information on using these menus
is in the supplemental Owner's Guide at
www.mitsubishi-tv.com.
Watching Broadcast TV
TV Connected to an Antenna or Direct Cable
Service (no cable box)
Note: Perform channel memorization to enable recep-
tion of digital channels. See page 7.
1, Press INPUTto display the Input Selection menu.
Highlight the antenna or cable icon and press ENTER.
Press EXITto close the New Device Found screen.
& Repeat the preceding steps for each additional
device you want to add.
Selecting an Input to Watch
1, Press INPUT.
Press 4 !_ and V to highlight an
input icon.
Sample Input Selection menu, DVD input selected
3, Press ENTERto switch to the input.
Note: In most cases, to see a named icon for a con-
nected device (as in the samples), you must first
assign a name either
• When the device is first connected and the
New Device Found menu offers a choice
of names.
• By using the Inputs > Name menu to
assign or change a name at any time after
the TV has detected the connection.
Sample Input Selection menu, antenna input selected
3, To tune to a channel from the ANT input, use any of
these methods.
• Enter the channel number using the number
keys on the remote control and press _.
For a two-part digital channel, such as 3-1,
press3
• Press _to change channels one channel at
a time.
• Press and hold _to speed through channels.
• Press _ to return to the previous channel.
• Use the Fav (Favorites) feature to tune to up to
nine favorite channels. See page 19.
• Press _to display ChanneIView channel
listings. Highlight a channel number, then
press _to tune.
• Set up ChannelView custom channel banks
and use the _ key to tune within predefined
groups of channels.
For assistance call 1(800} 332-2119