Filter
Top Products
3
GETTING STARTED
Tools needed:
• Phillips head screwdriver
• ¼”-20 wrench
• Drill with a #39 drill bit (drill for hard-mount installation only)
Slide off the cable cover. Slide off the horizontal stand.
Slide on the cable door and
remove the foam insert.
Loosen the lock nut, push back
the metal base plate and then
slide the cable through the cable
opening.
Mounting the MS7220: Peel off the base plate’s tape backing and affix it to
the countertop or drill four #39 pilot holes and secure the base plate to the
countertop with the four #8 wood screws provided.
Continued on next
p
a
g
e.