Filter
Top Products
31
DEFAULT SETTINGS
Many functions of the scanner can be "programmed" - that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk
( * ) in the charts on the following pages. If an asterisk is not in the default
column then the default setting is Off or Disabled. Every communication
does not support every parameter. If the communication supports a
parameter listed in the charts on the following pages, a check mark will
appear.
Parameter Default OCIA RS-232
Light
Pen
IBM
46XX
KBW
UPC/EAN
*
=====
Code 128
*
=====
Code 93
*
=====
Codabar
*
=====
Interleaved 2 of 5 (ITF)
*
=====
MOD 10 Check on ITF
=====
Code 11
=====
Code 39
*
=====
Full ASCII Code 39
=====
MOD 43 Check on
Code 39 =====
MSI-Plessey
=====
MSI-Plessey 10/10
Check Digit
=====
MSI-Plessey MOD 10
Check Digit
*
=====
Paraf Support
=====
ITF Symbol Lengths Variable
=====
Minimum Symbol
Length
4
=====
Symbol Length Lock None
=====
Bars High as Code 39
*
=
Spaces High as Code 39
=
Bars High as Scanned
=
Spaces High as
Scanned
=
DTS/SIEMENS
=