95-7801 DASH DISASSEMBLY
HONDA CRV 1997-2001
6
1
Disconnect the negative battery terminal to pre-
vent an accidental short circuit.
3
Cut and remove all mounting clips on the Radio
Housing EXCEPT clips "B" and "H" (Fig.A). Cut
and remove the slots on the bottom of the ISO
Brackets
(Fig. B). Skip to step #3a on Page 9.
Open the glove box, squeeze the retaining clips
and remove the stoppers. Lower the glove box
and remove (2) Phillips screws from the left
edge. Remove (2) Phillips screws from the lower
steering column panel and remove. Unclip the
lower console cover (below the ashtray and
pocket) and remove. Remove (2) Phillips screws
from the base of the center console, open the
console pocket and remove the (4) outer screws
exposed. Unclip the center console and remove.
Remove (2) Phillips screws securing the radio
trim bezel, disconnect the wiring, and remove
the trim bezel/head unit assembly. Remove (4)
Phillips screws securing the head unit to the
bezel and remove.
(Fig. A)
2
HOND
A CRV 2002-2006
1
Disconnect the negative battery terminal to pre-
vent an accidental short circuit.
2
Remove (2) Phillips from the bottom edge of the
radio trim bezel. Unclip the trim bezel and
remove. Remove (4) Phillips screws securing
the factory head unit and disconnect the wiring.
(Fig. A)
Cut and remove all mounting clips on the Radio
Housing
EXCEPT clips "C" and "H".
(Fig. B)
Skip to step #3a on Page 9.
3
A
B
A
B
