Filter
Top Products
Troubleshooting
31
The display shows No disc when
attempting to play a disc
❍ Check that the disc is positioned correctly in the drawer, with
the label uppermost; see To insert a disc, page 9.
❍ Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.
The display shows Error when
attempting to programme a selection
❍ Check that the disc includes the track number you are
attempting to programme.
❍ Check that you have not already programmed 31 tracks, the
maximum number.
A single key press on the remote
causes multiple entries
For example, you press 2 and the display shows Track 22. This
is because another Meridian unit on the Comms bus is also
sending the command.
● Check that the auto setup procedure worked correctly;
see To connect to other Meridian 500 Series equipment,
page 22.
● Try selecting NCon as the Controller mode; see Specifying
information about your system, page 27.