Filter
Top Products
Setting up the integrated amplifier
29
This is the unit that will respond to the remote.
All the other units will be configured
as non-controllers, and display:
NCon
Your system is now set up and ready for use.
● If, for any reason, the automatic setup does not give the
configuration you want, restore the default operation by
selecting Type 1 as described in To connect to Meridian 600
or 200 Series equipment, page 30.
● If you want to change the automatic setup configuration refer
to the Meridian 500 Series User Guide.
Note: Do not, under any circumstances, connect any equipment
other than Meridian 500, 600, or 200 Series to the socket
marked COMMS on the back of the integrated amplifier.
To connect to A500 Loudspeakers
A500 LoudspeakerA500 Loudspeaker
551 Integrated Amplifier
● Use the links provided to bridge the BASS/MID and TWEETER
terminals on the back of each loudspeaker.
● Connect one of each pair of the red and black terminals on
the back panel of the 551 Integrated Amplifier to the red and
black terminals on the A500 Loudspeakers.