Filter
Top Products
6
RADIO OPERATION
Set the VOLUME control ❶ to minimum
and plug the headphone into the PHONES
jack. Press the PLAY/PAUSE
(
)
/POWER ON button ❷ to turn the unit on.
1
TO LISTEN TO THE RADIO
Slide the FUNCTION switch ❶ to the
RADIO position. Press the ESP/BAND
button ❷ to select a band (AM or FM).
If listening to FM, press the MODE button
❸ to turn FM Stereo ON or OFF.
2
Press and release the SKIP/SEARCH –
❶ or + button ❷ to tune a
station. Press and hold the
SKIP/SEARCH – ❶ or +
button ❷ for rapid search tuning.
3
Adjust the VOLUME control ❶ and DBBS
switch ❷ as desired. If FM STEREO
reception is weak/noisy, press the MODE
button ❸ to turn off Stereo, in this case
the reception will be monaural.
4
To turn the radio off, press the STOP
(■)/POWER OFF button.
5
ANTENNAS
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
AUTO SCAN
Press and hold the SKIP/SEARCH – or
+ button for approximately 1 second and
the unit will automatically search for the next
available station.
MD6885.O/M.QXD 1/15/02 10:07 PM Page 6