Memorex MD6885 CD Player User Manual


 
14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE ( )/POWER ON
button to turn the unit on and press
the STOP ()/POWER OFF button to
stop auto playback. Press the PROG.
button ; the PROG indicator will
appear in the CD display.
1
Select the first track to be played back
using the SKIP/SEARCH – or +
button
, then press the PROG.
button
again. Repeat this step to
program additional tracks up to a
maximum of 24 tracks.
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button to begin
Program playback and adjust the
VOLUME control and DBBS switch
as desired.
3
To skip forward or backward through
the programs, press the SKIP/SEARCH
or + button
.
When the
disc is through playing, it will stop.
4
NOTES:
Press the
STOP ()/POWER OFF button
to stop the disc before it is nished.
As each program is played, the track number is shown in the display.
To clear the memorized program:
press the
STOP ()/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will turn
off or open the CD compartment.
Programming is the ability to preselect the order in which a series of tracks
will be played.
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD6885.O/M.QXD 1/15/02 10:07 PM Page 14