Filter
Top Products
OPERATION
8
Press the POWER button 1 to turn the
unit on. Press the FUNCTION button
2
to select the Tuner mode.
1
2
1
Press the STOP (■)/BAND button to
select AM or FM.
2
2
MANUAL TUNING: Repeatedly press
the Skip/Search/Tune
o 1 or n 2
button to manually advance the
frequency in the display up or down
until the desired frequency appears.
2
1
3
AUTOMATIC TUNING: Press and hold the
Skip/Search/Tune
o 1 or n 2 button until the
frequency in the display starts to scan, and
then release the button; the tuner will search
and then stop on the next strong station it
finds. Repeat this step until the desired
frequency appears in the display.
NOTE: If you have tuned to an FM Stereo
station, “STEREO” will light in the display.
2
1
4
Adjust the VOLUME Up/Down buttons
1 and EQ button 2 as desired.
Repeatedly press the EQ button
2 to
cycle through the following options:
Classic, Pop, Jazz, Rock and Flat.
1
2
5
To turn the radio off, press the
POWER button again.
6
LISTENING TO THE RADIO
ANTENNAS
AM
–This unit has a built-in ferrite rod antenna, which provides adequate reception in most
areas. If reception is weak, turn the unit to improve reception.
FM–The FM Antenna is for FM reception only. If reception is weak, adjust the length of
the antenna.