Filter
Top Products
OPERATION (CONTINUED)
14
Press the POWER button 1 to turn
the unit on. Press the FUNCTION
button
2 to select the CD mode.
Insert a disc as described on
page 10.
1
2
1
Press the PROG/MEMORY button;
“MEM”, “P-01” (the program number)
and the track number will appear in
the display.
2
For CD, use the Skip/Search/Tune o 1 or
n 2 button to select the first track to be
programmed.
For MP3/WMA disc, use the Preset/Folder
Up button
3 to select the first file in the
desired folder, then use the
Skip/Search/Tune
o 1 or n 2 button to
select the first track/file to be programmed.
2
1
3
3
While in Stop mode, press the
PROG/MEMORY button again; the
selected track/file has now been
programmed and counted as program
1.
4
Repeat steps 3 and 4 to program the
other desired tracks/files in sequence.
When the program memory is full,
“P-01” will appear again in the display.
34
5
Press the PLAY/PAUSE (®/p) button
to begin Programmed playback;
“MEM” will remain in the display and
the tracks/files will play in the
order programmed.
6
TO PROGRAM THE MEMORY (UP TO 20 TRACKS/FILES)
SEE NEXT PAGE FOR NOTES ON PROGRAMMED PLAY