Filter
Top Products
E-9
PROGRAMME PLAYBACK
Use this function to programme the CD player to playback tracks in the order that you like. Up to 20 tracks
can be programmed. Programme play is operated with the remote control or cabinet.
1. Press the PROG button
If a disc(s) has already been loaded, the CD player will go directly to the programming mode and the
“PROG” indicator will show on the system display. The disc number displayed indicates the disc that
is ready to be programmed.
Before proceeding:
When more than one CD is loaded: If you want to start programming on a disc other than the one
displayed at this point, first press the DISC SKIP Button to select disc 1, 2 or 3 for that disc in order
to select it before continuing with step 2.
2. To programme select tracks
Use the PROGRAM button to programme the tracks you want.
Each time a button is pressed the tracks number and programme number (P-01, P-02 etc.) will appear.
To programme all tracks:
Press the DISC SKIP to select disc button 1, 2 or 3 of the disc you are programming.
The programme number will appear (all tracks).
3. To continue programming on another disc. Press the DISC SKIP Button to select disc 1, 2 or 3 for that
disc and repeat step 2.
4. Press the button to start programme playback.
After playback of all programmed tracks has finished, playback will stop automatically.
To stop programme playback:
• Press the STOP button.
Note: The program memory will be cleared when press and hold the STOP button over 3 seconds.
Random playback
Use this function to programme the CD player to playback tracks in a random order. When more than one
disc is loaded, tracks will be randomly played back form all disc.
• Press the RANDOM button.
If a disc(s) has already been loaded, the CD player will go directly to the random mode and “RANDOM”
will show on the system display. Once tracks are programmed random playback will start automatically.
To cancel the random programme and stop playback:
• Press the STOP button.
Repeat play
Press the Repeat button before or during play. It is possible to perform repeat play of a single track, all
tracks on one CD, or all tracks on all CDs in the CD changer.
Each time the Repeat button is pressed, the mode will change in the order from 1 track repeat, to 1 disc
repeat, to all disc repeat, to clear mode.
LISTENING TO TAPE
This unit has 2 TAPE A / 1 and TAPE B / 2
Cassette decks The difference between them is TAPE B / 2 has record function but TAPE A / 1
hasn’t.
Stop / Eject Key Press to stop all deck operations. Press again to open the Cassette Doors.
Fast Forward Keys Press to start rapid tape Fast winding in either forward or reverse direction.
& Rewind Keys
Play Keys Press to stop playing a tape.
Pause Keys Press to stop tape operation temporarily.
Press again to resume tape operation.
Record Key Press together with Play (TAPE B / 2 ONLY) Key to start recording.
Memorex.p65 11/8/01, 11:11 AM9