Filter
Top Products
E-12
SLEEP TIMER
The sleep timer is a countdown timer for switching the system to standby mode after a specified time.
It enables you to listen to the radio, a CD or a cassette prior to falling asleep. The sleep timer can be set
from 120 to 15 minutes.
• Switch on the system by pressing the STANDBY (power) button, either on the system or on the remote
control.
– The STANDBY indicator disappears.
• Select the sound source by pressing TAPE, TUNER / BAND, AUX or CD.
• Press the SLEEP button to set the sleep time.
– The word SLEEP and the number 120 will appear on the display.
– The system will now play for 120 minutes.
• To decrease the sleep time in steps of 15 minutes. Press SLEEP button to number 15 will appear on
the display.
– After a few seconds, the previous display is shown again.
• To switch off the system before the SLEEP time has elapsed, press STANDBY (power), either on the
system or on the remote control.
SPECIFICATION
POWER SOURCE
AC: 120V~60Hz
RADIO FREQUENCY COVERAGE
FM: 87.5 – 108 MHz
AM: 520 – 1720 kHz
RECORDING SYSTEM
Recording System AC Bias
Erasing System Magnetic Erase
GENERAL
Speaker 4 Ohms
Power Output 10 Watt at 10% T.H.D. per channel
Headphones: 3.5MM stereo jack plug, 8 – 32Ω
CD PLAYER
Pick Up: 3-Beam, semiconductor laser
Encoding: 1-Bit linear 8 x oversampling
Memorex.p65 11/8/01, 11:11 AM12