Filter
Top Products
8
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER ON/STANDBY
button to turn the unit on; the
STANDBY indicator will go out.
1
Press the MEMORY/TIME SET
button ❶ (PROGRAM/CLK-SET on
remote); “MEMORY” will blink in the
display. Within 6 seconds, press the
REPEAT/PRESET UP button ❷ on
the remote until the desired memory
number appears on the display.
1
2
4
Press the TUNING/SKIP/Search
❶ or ❷ button to select a
station.
1
2
3
Press the FUNCTION button ❶
until “TUNER” appears in the
display.
Press the STOP/BAND (■) button
❷ to select AM or FM.
2
Press the PROGRAM/CLK-SET
button again to set the station in
the selected memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
35
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
12
1
Adjust the PRESET EQ button ❶
and MASTER VOLUME control ❷
as desired.
2
1
3
Press the REPEAT/PRESET UP
button to select a preset; the
station will automatically be tuned
in.
2
RECALLING RADIO PRESETS
MX4111.O/M.QXD 7/11/02 4:06 PM Page 8