Filter
Top Products
12
Press the TUNING/SKIP/Search
❶ or ❷ button to select
the first track that you wish to
program. When the desired track
number appears in the display,
press the MEMORY/TIME SET
button ❸ again.
1 3
2
4
Press either the TUNING/SKIP/
Search ❶ or ❷ button to
select the next track you wish to
program. When the desired track
number appears in the display,
press the MEMORY/TIME SET
button ❸ again.
1 3
2
5
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory.
1 3
2
6
After programming up to 20 tracks in the CD Program Memory, press
the PLAY/PAUSE (❿ ) button ❶ to begin programmed playback.
“MEMORY” will appear in the display and playback will begin on the
first track that you programmed. The player will continue to play all of
the tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the display will again show the total number of tracks on
the disc. If you press the MEMORY/TIME SET button ❷ and then
press the PLAY/PAUSE (❿ ) button ❶ again, playback will start on
the first track you programmed and will continue until all the
programmed tracks have been played. To cancel the Programmed
Playback mode, press the MEMORY/TIME SET button ❷ to enter the
program mode, and then press the STOP/BAND (■) button ❸ twice.
2
3
1
7
It is also possible to use the Program
and Repeat functions together to
repeat a specific program indefinitely.
First, enter the Repeat mode and
then program the tracks you wish to
hear in the order you wish to hear
them, as described above. Both the
MEMORY and REPEAT indicators
will appear in the display.
1
Press the PLAY/PAUSE (❿ )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Program Repeat operation will
continue indefinitely until you
press the STOP/BAND (■)
button.
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)
MX4111.O/M.QXD 7/11/02 4:06 PM Page 12