Filter
Top Products
10
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
either the TUNING/SKIP/Search
❶ or ❷ button to select a specific
track for playback.
1
2
1
You can also use the Direct Track
Selection buttons ❶ on the
remote to directly select a track. If
the track is over 10, press the >10
button ❷ first.
2
1
2
When the desired track number
appears in the display, press the
PLAY/PAUSE (❿ ) button.
Playback will begin on the track
you selected.
3
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
During playback, depress and
hold either the TUNING/SKIP/
Search ( ) or ( ) button to
move the player forward or
backward within a track to locate
a specific musical passage. The
player will move forward or
backward at high speed as long
as the button is depressed. When
you release the TUNING/SKIP/
Search ( ) or ( ) button,
normal playback will resume.
During playback, press the
TUNING/SKIP/Search ( ) button
once to advance the player to the
beginning of the next track. Press
the TUNING/SKIP/Search ( )
button repeatedly to advance the
player to higher numbered tracks.
1 3
During playback, press the
TUNING/SKIP/Search ( ) button
once to move the player back to the
beginning of the current track. Press
the TUNING/SKIP/Search ( )
button repeatedly to move the player
back to lower numbered tracks.
2
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( / )
OPERATING INSTRUCTIONS (CONTINUED)
To play the tracks on the CD in a
random order, press the
RANDOM button on the remote.
“RANDOM” will appear in the
display and the tracks will play in
a random order.
1
To cancel random playback,
press the RANDOM button until
“RANDOM” disappears from the
display.
2
RANDOM PLAYBACK
MX4111.O/M.QXD 7/11/02 4:06 PM Page 10